This Elna Ruffler / Pleater Foot is compatable with the following...
- Elna 2110
- Elna 2130
- Elna 6600 Quilters Touch
- Elna 2100
- Elna 2300
- Elna 2600
- Elna 2800
- Elna 3210 Jeans
- Elna 5100
- Elna 6200 Quilters Touch
- Elna 8600
- Elna 1000
- Elna eXperience 660
- Elna eXperience 620
- Elna eXperience 540
- Elna eXperience 520
- Elna eXplore 340
- Elna eXplore 320
- Elna eXplore 240
- Elna eXplore 220
Fashion and home items featuring gathering and pleats have never been easier. Instead of spending hours measuring, folding and pinning pleats, use the ruffler attachment for your Elna sewing machine, it's easy to use and its fully adjustable.
Adjusting the ruffling interval:
The ruffling interval is adjusted with the ratchet gear feed plate.
- When reverse stitching is required, set to the hole marked * on the ratchet gear feed plate. Set at * there is no ruffling; only straight stitching is obtained.
- The ruffling mechanism makes a tuck with every stitch, or every 6th or 12th stitch. The ruffling interval also differs depending on the stitch length.
- To make gathers, set to 1 on the ratchet gear feed plate and turn the ruffling depth adjusting screw to adjust the tucking depth to scale mark 1.
- To release (turn off) the ruffling mechanism, set to * on the ratchet gear feed plate.
Note: Before starting to stitch, make sure the needle does not touch the foot.
They are designed to ruffle or pleat fabric to the desired fullness quickly and easily and have the capability to vary the sizes of ruffles.
| Brand | Elna |
|---|
Write a review and share thoughts with others.
Write a Elna Ruffler / Pleater Foot review.
My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Recently Viewed...
